Sample Rates: 44.1, 48, 96, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)

Bit Depths: 24-bit I/O, 32-bit processing

PCI Specification:
- PCI 2.2 Compliant
- Form Factor: Universal Keyed, Short PCI Card
- 3.3V I/O, 5V Tolerant
- PCI Bus-Mastering DMA subsystem reduces CPU usage

E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)

Hardware-accelerated, 32 channel mixing, and multi-effects processing

Zero-latency direct hardware monitoring w/effects

ASIO 2.0, Stereo WDM/MME/DirectSound Drivers

EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable

Anti-Pop speaker protection minimizes noise during power on/off

Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)

Type: servo-balanced, DC-coupled, low-noise input circuitry

A/D converter: AK5394A

Level (software selectable):
- Professional: +4dBu nominal, 20dBu max (balanced)
- Consumer: -10dBV nominal, 6dBV max (unbalanced)

Frequency Response (20Hz-20kHz): +/- 0.05dB

Dynamic Range (1kHz, A-weighted): 120dB

Signal-to-Noise Ratio (A-weighted): 120dB

THD+N (1kHz at -1dBFS): -110dB (.0003%)

Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Type: balanced, low noise, 3-pole low-pass differential filter

D/A converter: CS4398

Level (software selectable):
- Professional: +4dBu nominal, 20dBu max (balanced)
- Consumer: -10dBV nominal, 6dBV max (unbalanced)

Frequency Response (20Hz - 20kHz): 0.0/-0.35dB

Dynamic Range (1kHz, A-weighted): 120dB

Signal-to-Noise Ratio (A-weighted): 120dB

THD+N (1kHz at -1dBFS): -105dB (.0006%)

Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Type: TFPro™ combination microphone preamp and line input

Frequency Response (20Hz - 20kHz): +0.8/-0.1dB

Dynamic Range (A-weighted, 1kHz min gain): 100dB

Signal-to-Noise Ratio (A-weighted, min gain): 100dB

THD+N (1kHz at -1dBFS, min gain): -94dB (.002%)

Stereo Crosstalk (1kHz min gain, -1dBFS): < -115dB

Line Input:
- Input Impedance: 10Kohm
- Max Level: +17dBV (19.2dBu)
- Gain Range -12 to +28dB

Microphone Preamplifier:
- Input Impedance: 330ohms
- Max Level: -12dBV (-9.8dBu)
- Gain Range: +10 to +50dB
- Phantom Power: 48V

Type: linear power amplifier

D/A converter: CS4398

Gain Range: 85dB

Signal-to-Noise Ratio (A-weighted): 117dB

THD+N (1kHz, max gain)
- 33ohm load: -70dB (0.032%)
- 600ohm load: -85dB (0.006%)

Stereo Crosstalk (1kHz at -1dBFS, 600ohm load): < -100dB

Type: RIAA equalized phono input

Maximum level:
- Professional: 80mV RMS
- Consumer: 20mV RMS

Input impedance: 47Kohm

Frequency Response (50Hz - 20kHz): +/-0.5dB

Dynamic Range (A-weighted): 91dB

Signal-to-Noise Ratio (10mV RMS unbal input, A-weighted): 91dB

Stereo Crosstalk (1kHz at -1dBFS): < -80dB

S/PDIF:
- 2 in/2 out coaxial (transformer coupled)
- 2 in/4 out optical (software switched with ADAT)
- AES/EBU or S/PDIF format (software selectable)

Firewire
- 400 Mbps 1394a port (6-pin)
- Compatible with DV cameras, storage peripherals, etc.

Internal crystal sync at 44.1, 48, 96, 192kHz
- ADAT (44.1 - 192kHz)
- S/PDIF (opt. or coax 44.1 - 96kHz)
- Word Clock (44.1 - 192kHz) (75ohm termination, switchable via software)

SMPTE/LTC/MTC
- 24, 25, 30 drop-frame, 30 non-drop
- SMPTE to MTC, MTC to SMPTE Conversion
- SMPTE Striping
- Flywheel/Jam/Regenerate

E-MU® 1010 PCI card

E-MU AudioDock M

E-MU Sync daughter card

EDI (E-MU Digital Interface) cable (3 meters)

Sync cable

Mini-DIN MIDI adapter cable

Headphone splitter cable

PC power cable

Quick Start guides for Emulator X and E-MU 1820M

Emulator X Software CD-ROM

Four Emulator X Sounds CD-ROMs

E-MU Digital Audio Systems CD-ROM
- Windows 2000 and XP Drivers
- E-MU PatchMix DSP
- E-MU Power FX
- E-MU E-DSP Effects Library
- Owner's Manual and Tutorials

E-MU Production Tools Software Bundle CD-ROM
- Cakewalk SONAR LE
- Steinberg Cubase LE
- Ableton Live Lite 4 for E-MU
- Steinberg Wavelab Lite
- IK Multimedia AmpliTube LE
- IK Multimedia T-RackS EQ
- Minnetonka diskWelder BRONZE
- SFX Machine LT
- E-MU Proteus X LE (over 1000 sounds included)