Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)

Bit Depths: 24 bit I/O, 32 bit processing

CardBus Card Specification:

- Form factor: PCMCIA Type II

- Bus-Mastering DMA subsystem reduces CPU usage

E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)

Hardware-accelerated, 32 channel mixing, and multi-effects processing

Zero-latency direct hardware monitoring w/effects

ASIO 2.0, Stereo WDM/MME/DirectSound Drivers

EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable

Anti-Pop speaker protection minimizes noise during power on/off

Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)

Type: E-MU® XTC™ combo mic preamp and Hi-Z/line input w/ Soft Limiter

Gain Range: +60dB

Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB

Stereo Crosstalk (1kHz min gain, -1dBFS): < -115dB

Hi-Z Line Input:

- Input Impedance: 1Mohm

- Max Level: +18dBV (20.2dBu)

- Dynamic Range (A-weighted, 1kHz, min gain): 112.5dB

- Signal-to-Noise Ratio (A-weighted, min gain): 112dB

- THD+N (1kHz at -1dBFS, min gain): -102dB (.0008%)

Microphone Preamplifier:

- Input Impedance: 1.5Kohms

- Max Level: +6dBV (+8.2dBu)

- EIN (20Hz-20kHz, 150ohm, unweighted): -127dBu

- Signal-to-Noise Ratio (A-weighted, min gain): 112.5dB

- THD+N (1kHz at -1dBFS, min gain): -103dB (.0007%)

- Phantom Power: 48V

- Soft Limiter: 5dB max compression (software selectable)

Type: servo-balanced, DC-coupled, low-noise input circuitry

A/D converter: PCM1804

Level (software selectable):

- Professional: +4dBu nominal, 20dBu max (balanced)

- Consumer: -10dBV nominal, 6dBV max (unbalanced)

Frequency Response (20Hz-20kHz): +0.0/-.03dB

Dynamic Range (1kHz, A-weighted): 112dB

Signal-to-Noise Ratio (A-weighted): 112dB

THD+N (1kHz at -1dBFS): -102.5dB (.0007%)

Stereo Crosstalk (1kHz at -1dBFS): < -120dB

Type: balanced, AC-coupled, 2-pole low-pass differential filter

D/A converter: CS4392

Level (software selectable):

- Professional: +4dBu nominal, 20dBu max (balanced)

- Consumer: -10dBV nominal, 6dBV max (unbalanced)

Frequency Response (20Hz - 20kHz): 0.0/-.06dB

Dynamic Range (1kHz, A-weighted): 112.5dB

Signal-to-Noise Ratio (A-weighted): 112.5dB

THD+N (1kHz at -1dBFS): -98dB (.0012%)

Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Type: linear power amplifier

D/A converter: CS4392 (dock), AK4396 (card)

Gain Range: 85dB

Maximum Output Power: 50mW (dock), 20mW (card)

Output impedance: 22ohms

Frequency Response (20Hz-20kHz): +0.0/-0.07dB

Dynamic Range (A-weighted): 112dB (dock), 115dB (card)

Signal-to-Noise Ratio (A-weighted): 112dB (dock), 115dB (card)

THD+N (1kHz, max gain): 600ohm load: -92dB (dock), -96dB (card)

Stereo Crosstalk (1kHz at -1dBFS, 600 ohm load): < -100dB

Type: RIAA equalized phono input

Maximum level:

Input impedance: 47K ohm

Frequency Response (20Hz - 20kHz): +0.1/-0.3dB

Signal-to-Noise Ratio (15mV RMS unbal input, A-weighted): 96dB

THD+N (1kHz, 15mV RMS input): -88dB (.004%)

Stereo Crosstalk (1kHz at -1dBFS): < -80dB

S/PDIF:

ADAT:

MIDI:

Internal crystal sync at 44.1, 48, 88.2, 96, 176.4, 192kHz

External sample rate sync via

E-MU 02 CardBus Card

E-MU MicroDock

EDI (E-MU Digital Interface) cable (1 meter)

Universal power adapter

MIDI breakout cable

CardBus Card carrying case

Quick Start installation guide

E-MU Digital Audio Systems CD-ROM
- Windows 2000 and XP Drivers
- E-MU PatchMix DSP
- E-MU Power FX
- E-MU E-DSP FX Library
- Owner's Manual and Tutorials